Gravity Feed Water Filter
Ceramic Drip Filter
The Gravity Feed Water Filter (Ceramic Drip Filter) is designed to filter water particles up to half a micron. It is shaped like a dome and
manufactured to remove different water contaminants such as water-borne bacterium. It is manufactured by Winfield and Black Jack Industries.
And because we believe this item is critical as part of emergency preparedness, we have included instructions on assembling the kit as well as instructions on how to construct a Gravity Feed Water Filter of your own, if you prefer.
Product manufactured to meet standards
Pictures of the Gravity Feed Water Filter
Gravity Feed Water Filter - Kit and Parts Price List
How to assemble the Gravity Feed Water Filter [or build your own]
Complete Ceramic Drip Filter Kit w/ 2 - 5 Gallon Pails
Complete Kit w/ 2- 5 Gallon Pails & 1 - Gamma Lid
4" x 4" Ceramic Filter with Sock, Spigot and  1/2” ID Flat Washers
Filter with Sock and  1/2” ID Flat Washers
Filter and  1/2” ID Flat Washers
Pre-Filter Sock ONLY
Two 1/8” Thick flat washers
Complete Ceramic Drip Filter Kit:
Includes filter, sock, spigot,  1/2" flat washers and  two pre-drilled 2 gallon buckets.
- 1 complete kit - $59.99
- 2 complete kits - $117.98 ($58.99 ea)
- 4 complete kits - $230.00 ($57.50 ea)
4" x 4" Ceramic Filter with Sock, Spigot and  1/2" ID Flat Washers
- 1 kit - $47.89
- 2 kits - $91.78 ($45.89 ea)
- 4 kits - $165.96 ($41.49 ea)
- 6 kits - $237.00 ($39.50 ea.)
- 12 kits - $442.68 ($36.89 ea.)
- For larger orders please call for discounts.
Filter with Sock and  1/2" ID Flat Washers:
- 1 kit - $43.74
- 2 kits - $85.84 ($42.74 ea.)
- 4 kits - $158.80 ($39.95 ea.)
- 6 kits - $207.00 ($34.50 ea.)
- 12 kits - $382.68 ($31.89 ea.)
- For larger orders please call for discounts.
- 1 kit - $41.95
- 2 kits - $79.90 ($39.95 ea)
- 4 kits - $150.96 ($37.74 ea)
- 6 kits - $196.26 ($32.71 ea.)
- 12 kits - $361.20 ($30.10 ea.)
- For larger orders please call for discounts.
- 1 Sock - $4.25
- 2 Socks - $8.00 ($4.00 ea)
- 4 Socks - $15.52 ($3.88 ea)
This is a set of 2 (two) pre-drilled 2 (two) gallon buckets.
- 1 set - $20.06
- 2 sets - $38.12 ($19.06 ea)
- 4 sets - $72.24 ($18.06 ea)
5 Gallon Pail w/Gamma Lid
The purpose for this pail is to allow for easy portability and storage. The Complete Water Filter Kit stacks neatly together and fits nicely into this pail with plenty of room to spare. Using the larger bucket to store all of the components helps to keep the emergency water filter, bucket lids and miscellaneous pieces together. Inside the bucket with the gamma lid you might include a wash cloth, a hand tell, dish cloth and some cups to drink with.
- 1 set of Two Flat Washers - $3.25
Price $49.95 Now $39.95 Save 20%
Spring Roll portable filter! What is it?
The Spring-Roll portable filter is a water bag that can be filled and hung from a tree. Leave it in place to drip into a bucket so you always have the same high quaility of filtered water where ever you go. Take it camping, hunting, or when bugging out in an emergency. Get more info HERE
Just take a look at what the Gravity Feed Filter provides:
- National Sanitation Foundation (NSF) Standard 42
- National Sanitation Foundation (NSF) Standard 53
- ISO 9002 Quality Standard
- USA AEL Laboratories
- USA Analytical Food Laboratories
- USA Johns Hopkins University
- British 5750 Quality Standard
- England's Water Research council (WRc) Performance Standards
This product is silver impregnated and will not permit bacteria growth-through (mitosis). It provides a hostile environment for all microbiological organisms and will not support their growth. Ceramic elements may be cleaned 100 or more times with a soft brush or damp cloth.
- 99% Arsenic 5 and 99% Arsenic 3 (special order)
- 99% Hydrogen Sulfide (H2S)
- 95% Chlorine and Chloramines
- 99% Taste
- 99% Odor
- 98% Aluminum
- 96% Iron
- 98% Lead
- 90% Pesticides
- 85% Herbicides
- 85% Insecticides
- 90% Rodenticides
- 85% Phenols
- 85% MTBE
- 85% Perchlorate
- 80% Trihalomethanes
- 95% Poly Aromatic Hydrocarbons
- 99.999% of particles larger than 0.5 micron (Staffordshire University Labs) (includes Anthrax)
- 99.7% of particles larger than 0.3 micron (Staffordshire University Labs)
- 98% of particles larger than 0.2 micron (Staffordshire University Labs)
- 100% of Giardia Lamblia
- 100% Cyclospora
- 1005 removal of live Cryptosporidium (WRcStandard)
- 100% removal of Cryptosporidium (NSF Standard 53 - A.C. fine dust - 4 log challenge)
- 100% removal of E. Coli, Vibrio Cholerae (John Hopkins University)
- 99.999% removal of Salmonella Typhil, Shigella Dysenteria, Kiebsiella Twrrigena (Hyder Labs)
- Easy installation
- Good flow rate
- up to 1 gallon of clean water per hour (gravity flow) or
- up to 300 gallons per hour (pressure flow)
- Filer will accept water from floods, lake, rain, well, tap, river or stream.
- Semi-annual filter replacement cleanable with a clean damp cloth
- Shelf life is extended by shaking filter every 3-4 months to loosen media inside and prevent packing
- Once in use, filter will last 6-8 months.
When disaster strikes
When there is a disaster the devastated areas always need clean water. Emergency help often arrives late so it's important to have a back up system of your own for survival until supplies can be brought in on a larger scale. Our portable filtration system is extremely simple to use and rather easy to maintain. Anytime we look for something new we want it to be safe and easy to use and that is our goal here. Simplicity and mobility have to be part of our design - that's why we recommend smaller buckets for portable use and larger buckets or containers for group gatherings or stationary use.
The Gravity Feed System
It's a simple two-bucket system, one bucket mounts on top of the other. The buckets or containers are usually plastic and they can be almost any size - two-gallon, five-gallon or ten-gallon. The size really doesn't matter. For easy get away, our family filter fits into a two-gallon bucket. The two buckets stack together with the filter mounted inside and the lids stacked on top of each other. For a larger family or a bigger group, it might be more practical to start with the five-gallon bucket so the water supply is ample for the group.
Assembling the Unit
Assembling a filter begins by drilling a 1/2" hole in the bottom center of the top bucket and another 1/2" hole through the lid of the bottom bucket. The holes should be directly in line with one another. Ignore drilling procedure if the holes are already there.
The filter comes with two 1/2" flat washers. Leave just one washer on the stem of the filter and lower the filter assembly carefully down into the top bucket. As you lower the filter gently align the shaft so it fits through the base of the bucket. If the hole is too tight you can take a pocket knife and lightly scrape the hole to ease the assembly of the shaft.
Take the second 1/2" flat washer and install it on to the shaft before you assemble the lid of the bottom bucket to the bottom of the top bucket. In other words the second washer is meant to provide a seal between the lid and the base of the top bucket just in case water settles into the lid.
Once the lid, the filter and wing nut are fitted together, gently tighten the wing nut to prevent contamination or leakage. Be cautious and do not over tighten the nut so much it stresses and cracks the filter or its stem.
It will also be necessary to install a 3/4" spigot to the bottom bucket. The hole is drilled deep into the sidewall of the bucket, but not so far down it makes it impossible to screw the nut onto the shaft of the spigot. When installed the nut fits on the inside wall near the floor of the bucket. If the hole is drilled too low in the side of the bucket the nut will interfere with the floor of the bucket making it impossible to install the spigot. If the holes too high you won’t be able to get all the water out of the bucket. It’s best to use the nut to determine the positioning so you’ll know exactly where to put the spigot hole.
For anyone who's not good with details, we provide a complete ready-made pre-drilled kit that is already to use in case of emergency. This filter kit includes a protective sock that fits over the filtering element that can be secured with a rubber band or a light weight string. Securing the sock is particularly good where extreme turbid water and contaminants are noticeable such as fish scales, fecal matter and etc. When you put water in the top bucket it slowly passes through the filtering element and trickles down through the filter shaft on into the bottom bucket at the rate of approximately 1 gallon per hour. If the water flow becomes too slow a scotch pad can be used to gently "lightly" scrub the outer surface of the filter.
For a small to midsize family it is recommended you have at least two of these filter kits on hand so you can say "I have a year's supply".
A Ceramic, Half-micron Water Filter
The small micron size opening removes water-borne bacterium. The inside of the filter is loaded with different media or ingredients, such as man-made carbons, mother nature made carbons and man-made resins. Those different resins and carbons remove the different contaminants in the water.
The Filter and its Parts Will Last
Once you start using the filter, the activated carbon is only good for 6 to 8 months. The anti-bacterial ceramic wall will work indefinitely. The media inside [such as the activated carbon] will pack over time. The filter needs to be shaken to unpack the media. The shelf life of the unit itself is indefinite. The only question is the carbon. Current figures say the unused carbon should have a shelf life of 2 to 3 years, maybe more. The sock has an indefinite shelf life. Replacement during use will depend on the filthiness of the water source.
Freezing temperatures can damage a filter. The best place to store a filter kit is indoors to avoid freezing temperatures.
BUYER BEWARE - Since there has been a decrease in availability for the larger
x 4 water filter an inferior replacement has emerged into the market confusing people.
Here’s a list of things to look out for when buying a quality water filter for your protection.
- The amount of charcoal in the water filter. The larger the filter the more room there is for charcoal.
- The diameter of the filtering surface. The filter with the largest diameter makes the water travel through more charcoal before it drips through the center hole.
- The overall construction of the filter and the precaution taken to prevent the water from potentially running around the filtering element. Notice the larger filter with the black base - it has an obvious sealer around its base and dome; whereas the smaller one is questionable since it’s not visible.
- The overall weight of the filter can tell something important about the quality of the filter. It tells you which one contains more ceramic material and charcoal.
- Another good comparison would be to gently shake the filter to see how much charcoal is inside the filter. If you hear a lot of movement that’s a good indication there is very little charcoal inside the dome. Less movement within the filter indicates the volume of charcoal is greater.
- The drain hole in the bottom of the filter may affect the flow ratio. The larger filter in this case has the bigger drain hole.
Quick helpful tips and hints to identify the filter you’re buying.
- The color of its base.
a. The filter with the white base is usually smaller.
b. The Larger Filter normally has a black base.
- The filters dimensions.
a. Smaller filter is approximately 3-1/2” x 3-7/8”
b. Larger filter is approximately 4” x 4”
- The weight of the filter tells a big story about its filtering content.
a. White base “smaller filter” weighs approximately 8 oz.’s.
b. Black base “larger filter” weighs approximately 13.1 oz.’s.
- Size of drain hole.
c. White base “smaller filter” drain hole approximately (.019) ID.
d. Black base “larger filter” drain hole approximately (.022) ID.
Return to top of page
Information on this site is provided for informational purposes and is NOT meant to substitute for the advice provided by your own physician or other medical professional. Any claims concerning the effectiveness of the Miracle 2 [Miracle II] products are limited tot he experiences of the person or group of persons making such claim. You should not use the information contained herein for diagnosing or treating a health problem or disease, or prescribing medication. You should read carefully all product packaging. If you have or suspect that you have a medical problem, promptly contact your health care provider. Information and statements regarding dietary supplements have not been evaluated by the Food and Drug Administration and are not intended to diagnose, treat, cure, or prevent any disease.
Miracle 2 of Utah is your source for the best prices on Miracle 2 products; including Miracle II Soap, Miracle 2 Moisturizing Soap, Miracle II Neutralizer, Miracle 2 Gel, Miracle II Skin Moisturizer, and the Miracle 2 Laundry Ball. We also carry Magnetic Pain Therapy; including, Magnetic Knee Wraps, Waist and Back Wraps, Wrist Wraps and Magnetic Dots. We carry natural healing books; including, the best-seller, "Alkalize or Die". Other products carried by Miracle 2 of Utah include; pH testing paper, Aroma Diffusers, Natural Deodorant Stones, EZ Clenz, Coral Min, Natural Balance, Bio Active Whey Protein [Glutathione], Stem cell enhancement for people and pets, Syringa Resolve, Natural Calm [magnesium supplement], Essential Oil Diffusers, and much more.
Copyright © 2011 Bob Vance. All Natural solutions ~ Miracle 2 of Utah - PH:801-489-3471 Email Bob Vance