Welcome to Miracle 2 of Utah
Close
Miracle 2 of Utah & All Natural Solutions, Mapleton, UT 84664, USA
(801) 489-3471 vancebandg@juno.com

Scout 2.5” Filter 1.2L/min Hydration System

$28.85

Item# HYD 040-2.5
1 for $28.85
2 or more $27.75 ea.

Quantity discounts
1 $28.85
2-999 $27.75
1000+ $28.85
Category: Product ID: 2556

Description

RapidPure Scout 2.5 Filter 1.2L/min back pack Hydration System

Rapid Pure Scout 2.5″ Filter for Inline Hydration Back Packs – the technology in RapidPure filter media is better than 2 micron, 1 micron; it is even better than 0.1 micron absolute pore size filters. In fact, it is essentially a 0 micron filter – beating all others on the market. How can it be? A zero micron filter would not even pass water. How does it work? We feel that this is simply the best available technology today.

What is the benefit of using a RapidPure filter?
Rapid Pure filters deliver very high quality drinking water.

What is the down side to the user?
High quality filtration reduces filter element life.

The decision that the user must make is – what’s most important?
Water quality or filter life?

Staying healthy with high quality filtration or having more money in your pocket?

Stated another way, either you have a RapidPure filter or you become the filter.

RapidPure filters are designed to filter all types of water with
excellent removal of…

  • Virus
  • Ortho-phosphate
  • Bacteria
  • PCB’s
  • Cyst
  • BPA
  • Humic Acid
  • Penicillin
  • Bromine
  • Flumenquine
  • Chlorine
  • DNA/RNA
  • Iodine
  • Polysaccharides
  • Lead 8.5 ph

RapidPure also has good removal of…

  • Arsenic III 6.5 ph
  • Arsenic III 8.5
  • Arsenic V 6.5 ph
  • Ferrous iron
  • Lead 6.5 ph
  • Soluble silica
  • Trihalomethanes (THM)
  • VOC

 

Scout Hydration Filtration System Instructions for Use

How to Install a RapidPure Scout 2.5 filter on my Hydration Pack?

  1. Locate the best place in the tubing to install the Scout filter and make sure the filter is installed where the tubing will not be pinched.
  2. Cut the hydration line at desired location usually near the mouth piece.
  3. Insert the Scout filters barbed ends into the hydration pack hose with the arrow pointing towards the mouthpiece.
  4. Double check the tubing to be sure it’s securely attached to the filter fittings.
  5. Scout filter with Hydration pack is now ready to be used.

How to replace a Scout 2.5 Filter Element?

  1. Remove Scout top cap by turning it counter-clockwise 3/8” then pull top cap up and out of Scout filter body housing.
  2. Pull the filter element out of Scout body housing.
  3. Be careful not to puncture, slice or crush the filter element.
  4. Put the replacement filter in Scout housing making sure both o-rings fully seat into the discharge ports.
  5. Make sure key tabs and slots lock shut.
  6. Insert the top cap and rotate clockwise 3/8” until the tabs are fully seated in groove of Scout body housing.
  7. Make sure Scout top cap o-ring is not pinched or bunched up, if this occurs remove Scout top cap and top cap ? turn to new location on housing and reinstall.
  8. If Scout top cap o-ring still pinches or bunches up apply a bit of petroleum jelly to Scout top cap o-ring and reinstall Scout top cap as directed above.
  9. Scout filter Hydration pack is now ready to be used.

Additional information

Weight .55 lbs
Dimensions 8 x 3 x 3 in

Reviews

There are no reviews yet.

Be the first to review “Scout 2.5” Filter 1.2L/min Hydration System”

Your email address will not be published. Required fields are marked *