Welcome to Miracle 2 of Utah
Close
Miracle 2 of Utah & All Natural Solutions, Mapleton, UT 84664, USA
(801) 489-3471 vancebandg@juno.com

LED Solar Lamp, Panel and Remote

$27.10

2 or more $25.75
4 or more $24.39

Quantity discounts
1 $27.10
2-3 $25.75
4-999 $24.39
1000+ $27.10
Category: Product ID: 2513

Description

LED Solar Lamp w/Panel and Remote

2000mah Lithium Battery AC/DC Solar Lamp with 2W6V Solar Panel

Item# DU12R/DU12

This is not a normal LED bulb. It’s an AC/DC rechargeable lamp for daily or emergency use renowned for its usefulness and can be taken anywhere after a charge. Therefore ideal for the home, remote area, campsite, tent light, flash light, outdoors, traveling, work projects and anywhere you need light.

We make these charging stations and could sell you the whole kit preassembled ready to use for a measly $130.00. This unpainted charging box includes 2 LED Solar Bulbs, 2 Solar Panels, 2 Remotes, 2 AC outlet adapters, and one power charging strip.

We made this charging box for our solar emergency LED portable ceiling lamp slash rechargeable camping bulbs and we love it.

Working Index for Solar Rechargeable LED Light
No Index Parameter
1 Power Applied DC/AC
2 AC 85-265V/50-60HZ
3 Maximum AC Power 2.5W
4 Battery Capacity 2000MAH Lithium-ion Battery
5 DC Recharge Current 180MA±5
6 Lighting Time with DC Volts Over 9 Hours
7 Working Temperature +50℃/-30℃
8 Beads Life Time 50,000 Hours
9 Beads Type SMD2835 Beads
10 Beads Quantity 12 Pieces
11 Lamp Holder E27 Screw Thread
12 Shell Material ABS+PS
13 Color Temperature 6000-7000K Cool White
14 Luminous Flux 120-140 Lumens
15 Battery Life Time 500 Charge-Discharge Times
16 One Input Hole To recharge lights with solar panel
17 One Output Hole To recharge other electronics with light
18 Solar Panel 2W 6V Polycrystalline With Aluminum Frames
19 Remote Controller Brightness Adjusted

Directions for Use:
1. Put the LED lamp switch into OFF position, connect the lamp holder with the AC power socket. Turn on the AC power, then lamp is being recharged. If the lamp switch is into DC position, the lamp works on with AC power. If the lamp switch is into AC position, the lamp works as normal LED bulb.

2. If AC power goes off suddenly, and the switch is into OFF position, the lamp is not recharged and does not work. When the switch is into DC position, the lamp works on with battery inside. When the switch is into AC position, the lamp does not work at once. If the AC power would not come back again after a long time, and there is no need for the lamp, please put the switch into OFF position.

3. If not connect with any AC power by the lamp socket, or when there is no AC power even the lamp is connected with AC power socket, then the LED lamp can work as portable torch. When the lamp is into AC or OFF position, the lamp does not work. When the lamp is into DC position, the lamp works on with the inside battery to provide power.

4. As long as the lamp works on with AC power or with battery inside, the remote controller can turn off and on the lamp directly. Six different brightness levels can be adjusted with the remote controller.

5. Keep the remote controller in the safe place and do not lose it.

6. Avoid looking into the LED beads directly when the lamp works, as it would hurt your eyes with the strong LED beams.

7. Recharge mobile phones or other smaller electronics products with lights DC5V output USB port through USB cable.

Charging Method
To charge the LED lamp, plug the LED lamp into the standard AC socket. Turn ON the AC power and put the lamp switch into OFF position or turn off the lamp with remote controller.

To charge the LED lamp, connect the LED lamp with 2W 6V solar panel through DC6V input hole, put the lamp switch into OFF position or turn off the LED lamp with remote controller, then put the solar panel into sunshine. The specific charging time depends on the intensity of the sunshine.

Charge the LED lamp once in every two months if the LED lamp has not been used for 2 months.

Solar Panel Spec’s

1. Essential Parameters

Whole Size: L*W*H

160*135*17MM

Net Weight

0.25KG

Rated Maximum Power

2W

Open Circuite Voltage

7.2V

Operating Voltage

6V

Short Circuit Current

0.37A

Operating Current

0.34A

Maximum System Voltage

600V

Module Operating Temperaature

-45℃-+85℃

Performance Tolerance

0/+6%

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Temperature Coefficient:

Max.Power Temp.

-0.37%/℃

Open Circuit Voltage Temp.

-0.34%/℃

Short Circuit Current Temp.

0.09%/℃

Nominal Operating Cell Temp.

47℃

Standard Test Conditions(STC)

25℃,1KW/㎡,AM=1.5

 

 

 

 

 

 

 

 

 

 

3. Solar Cable Size

Solar panel cable length is 3 meters with 5.5/2.1 DC input hole.

Additional information

Weight 1.3 lbs
Dimensions 8 x 5 x 6 in

Reviews

There are no reviews yet.

Be the first to review “LED Solar Lamp, Panel and Remote”

Your email address will not be published. Required fields are marked *