Automatic Soap Foam Dispenser

 Automatic Soap Foam Dispenser

The Best Selling Features of a Smart Foam Making Machine

• Micronized sized bubbles
• Plump and Dense Foam Bubbles
• Delicate Foam Finer and More Efficient
• Strong Motor
• Low Power Consumption
• Quieter Motor

3 Volume Adjustments

• Single Press Power Button Indicator
• 3 colors to remind you of the Output Soap Volume
• White Indicator: High Amount Mode (18 g)
• Blue Indicator: Mid Amount Mode (1 g)
• Green Indicator: Low Amount Mode (.06 g)

LIQUID MIRACLE SOAP 2 + WATER EQUALS LUSH and RICH FOAM BUBBLES

Liquid Miracle Soap and water can be added to the foam soap dispenser in proper proportions once the top half of the machine is rotated off and set aside. Therefore, you can also pour ordinary foam soap directly into the reservoir or you can add your choice of liquid soap and dilute it accordingly. Typically 1/3 Miracle 2 Soap and 2/3 water make the best foamy hand soap ever.

300 ML Infrared Liquid Soap Dispenser

USB Smart Foam Machine 300 ML infrared Liquid Soap Dispenser makes rich, plump, and dense foam bubbles. Dense pump foam bubbles penetrate easily into pores; making cleanup and rinse that much more thorough.

USB Rechargeable Smart Foam Machine

This stylish-looking cordless USB hand sanitizer and foam dispenser is equipped with several uniquely tailored functions. Namely, when the battery is low an orange indicator light will light up to remind you it needs a charge. Simply connect the USB charging cable to the machine and leave it there for as long as it takes the white light to remain on. A full charge takes place in approximately 3 hours, when it is done detach the power supply.

Automatic No Touch Sensor

In addition to its luscious foam sensitivity, it has an automatic no-touch sensor. To start or stop the machine simply long press the touch top switch for 2 seconds then the white light will flash to start the machine. To advance the gear position and adjust the volume, lightly touch the top switch to reduce the foam supply. So initially, the soap dispenser starts on white (high), one touch will advance to blue (medium) and a second touch will change the gear to green (low).   To turn it off, hold the touch switch until the light turns orange.

Distinguishing Features

Contact-free (Infrared Sensor)

Easy access foam nozzle (45-degree incline)

Bubbles quickly (0.25 seconds)

One-touch control light reminder system

Long battery life USB Charging

Transparent window to read liquid soap level

Levels of adjustment (click to adjust the gear)

Waterproof

3-speed adjustment – white light (1.8 g), blue light (1 g), and green light (0.6 g)

Easy to dilute and add liquid soap and water

Easy setup and installation

Dimensions and Specifications

Height 8.62” (21.9 cm)

Top Width 3.86” (9.8 cm)

Bottom Width 2.76” (7 cm)

Product material ABS

Product weight 280 G

Rated power 2.6 W

Capacity 300 ML

What soap can be used in this Soap Foam Making Dispenser?

Either foam soap or diluted ordinary liquid soap

In addition, you can use diluted shampoo, face cleaners, and dish detergents, but don’t use detergents that have solid particles. It can block the feeding tube and plug the nozzle.

About Charging the Foaming Hand Soap Dispenser

This automatic soap dispenser is a rechargeable one, with a built-in 800 mah battery, there’s no need to replace the battery.

A full charge could last for about 2-3 months depending on use and size of the family.

Make sure to charge it for 2-3 hours till full charge. The indicator lights up in red when charging and turns to white after a full charge.

If the indicator doesn’t light up, try to charge it with another cable. After a full charge, remove the charging cable, turn it on, and press the power button for 2-3 seconds. It won’t turn on by single click or multiple clicks!!!

With our 800 mah built-in battery: A single charge could work about 3000 times as compared to other battery-operated dispensers, it reduces battery consumption and saves more money. A charging socket designed with a rubber plug protects the soap dispenser from moisture that may hurt inside components.

Is there a way to fix a plugged line?

A squeezable bottle with a long beak can clean out sediment in a line. Add water to a squeezable bottle and force pressure through the line. First, remove the filter at the end of the tube then connect the bottle beak to the end of the tube. At first, water may not flow through the outlet, while maintaining a good connection keep pushing/squeezing the bottle and water will come out little by little.

How often should I clean my Liquid Soap Dispenser?

Our advice is to do this occasionally before you add a new batch of soap to the dispenser. Rinse out the reservoir thoroughly with clean water then add fresh water. Before adding new soap turn on your soap dispenser and pump fresh water through the machine, do that for about 5 to 10 seconds. Doing so will help keep the lines clear.

What about refilling my Foam Soap Dispenser?

So when you refill it, be careful not to over or under-dilute the soap. Too much water makes soapy foam runny and too little water restricts the flow. The first time or two it might be a little tricky until you get the dilution just right after that it will be a piece of cake.

What should you do before and after you turn on your Cordless Hand Sanitizer?

Before you turn on the machine to test the flow get a cup or a small container to hold under the nozzle so you don’t waste the soap. I like to use the excess Miracle Soap to scrub the bathtub or bathroom sink instead of wasting it.