IonPlus Undersink Water Ionizer – Peaks Performance and Design
Are you concerned about tap water? How about heavy metals, fluoride, chlorine, leftover pharmaceutical drugs and other contaminants found in drinking water? An Ion Plus can take care of it for you!
IonPlus uses an 11 stage advanced filtration system, which includes super ceramic, anion ceramic, and anti-bacterial ceramic for removing the most difficult contaminants.
The water purification process also includes activated carbon, carbon block, and a sediment filter for removing bigger contaminants. Therefore, end result is a fresher drink of alkaline ionized water every time!
Ion Plus Water Ionizer Above Sink Water Faucet
The new IonPlus Faucet was designed to satisfy consumer needs. Besides the biggest complaints for previous models were these – the faucets were too small, the arms wouldn’t swivel, made of plastic, and the controls were too hard to use.
The Revelation 2 Under Sink Ionizer is also a really good water ionizer.
An IonPlus UnderSink Water Ionizer has a faucet tall enough to put a large pot below it. It’s made of stainless steel so it’s easy to clean and beautiful to look at.
The faucets top arm extends well into the sink and swivels from side to side, making it easier to wash with acidic water and cook with alkaline water.
The buttons are easy to understand and push so even a children or an elderly person won’t have trouble operating the machine.
IonPlus Controls Simple to Use
There are three button’s one for alkaline, another for acid and one more for on and off. If you want water, you press the on/off button. Use the alkaline or acid button to choose which pH level you want.
Alkaline 3 is recommended for drinking water since this level creates a glass of water similar to what you’d find in a pristine spring or glacial stream.
Alkaline 4 is the super-alkaline water button. Super-alkaline water can be used for cooking. It can neutralize oil-based stains and get the oil-based pesticides off your fruits and vegetables.
Acid water buttons can create two levels of acidic water.
Acid Level 1 is mild acidic water used for watering houseplants and sprinkling on face.
Acid Level 2 is super acidic water that can be used to kill bacteria and viruses.
To avoid the use of harsh chemicals. Use a spray bottle and squirt super-acidic water around the kitchen and bathroom to keep it sterile.
Multi Layered Advanced Water Filtration System
An IonPlus Undersink Water Ionizer is a patented filtration system that was designed to give fresh, delicious, alkaline and ionized water every time. Initially the water passes through a sediment filter to get the larger particles out of the water. Then it goes through activated carbon to remove chlorine, bacteria, and other common contaminants. After that the water goes through a series of three ceramic filters each designed to target specific difficult to remove contaminants such as heavy metals, fluoride, chloramine, and even leftover pharmaceutical drugs. The end result is 99.99% pure drinking water ready to be ionized!
For faucet installation you’ll need a 1.25 inch hole, which is the same size as the utility holes that are part of nearly every stainless steel sink. More often than not these utility holes will have a soap dispenser or a sprayer already installed in them, which can be removed.
Once the hole is clear, you can insert the faucet stem down into the hole. Use the provided nut to secure the stainless steel faucet stem to the sinks countertop.
Under the sink locate the cold water line spigot and turn the water off. Then remove the 3/8” or ½” hose that is connected to the cold water faucet by unscrewing it. After that, take the cold water line diverter valve provided with the machine and screw it on to the cold water spigot. Then screw on the dangling hose to the other side of the diverter valve so that it is installed between the hose and the spigot.
Next, attach the tube to the cold water line diverter valve by pushing it inward and then attach the other end to the WATER INPUT line under the IonPlus base. And finally, attach the tubes that go between the base and the faucet and then connect the communication cable and you’re all set!
A typical installation takes approximately 20 minutes once you figure out how to do it. If you need to drill a faucet hole using a carbide hole saw, then factor in at least another 15 minutes. Most people do not need the plumbers help to install an IonPlus.
An IonPlus Undersink Water Ionizer does not use as much power as other models yet it still provides the same powerful ionization.
A Revelation 2/IonPlus comparison test showed the ionization strengths were almost the same.
With the IonPlus there are 4 alkaline levels and 2 acidic levels to choose from. It runs on 110V and is not convertible to 220V like the Revelation 2. It weighs about 15 pounds all together.